What are the areas that need to be inspected after assembling the galvanized water tank? How much do you know? In order to facilitate users to better understand our product information, the following is a brief introduction by the editor to its relevant knowledge points.
After the installation of the galvanized water tank, it is generally necessary to conduct a leakage test, close the drain valve and outlet valve, fill the water to the specified level, and after 2-3 hours, there should be no leakage or obvious deformation in any part of the galvanized water tank. The inspection of water quality indicators shall comply with the provisions of GB/T 5750. The verticality of galvanized water tanks should be measured using measuring tools and comply with the provisions of 4.10. The connection flange shall be tested according to the method specified in GB/T 9119-2000, and the connection pipe thread shall be tested according to the method specified in GB/T 7360.2-2000.
The above are the relevant knowledge points of galvanized water tanks. We hope that the above content can be helpful to everyone. Thank you for your viewing and support. We will organize more information for you in the future. Please stay tuned for updates on our website.