How much do you know about the places we need to inspect after assembling the hot-dip galvanized water tank? In order to facilitate users to better understand our product information, Mingxing Water Supply Tank Factory will give you a brief introduction to its relevant knowledge points.
Generally, after the hot-dip galvanized water tank is installed, it is necessary to measure the water leakage, close the drain valve and the water outlet valve, and fill the water to the specified water level. After 2h to 3h, there must be no leakage or obvious deformation in all parts of the hot-dip galvanized water tank. The water quality index inspection shall be in accordance with the provisions of GB/T 5750. The verticality of the hot-dip galvanized water tank shall be measured with a measuring tool, which shall meet the requirements of 4.10. The connecting flange shall be tested according to the method specified in GB/T 9119-2000; the connecting pipe thread shall be tested according to the method specified in GB/T 7360.2-2000.
The above are the relevant knowledge points of the hot-dip galvanized water tank. I hope the above content can be helpful to everyone. Thank you for your viewing and support. We will sort out more information for you later, please pay attention to our website update.