|
Flow range |
0-300m ³ /h |
|
Pressure range |
0-2.5MPa |
|
Pressure regulation accuracy |
≤0.01MPa |
|
Ambient temperature |
0℃ to 40℃. If the temperature exceeds this range, corresponding measures must be taken. |
|
Relative humidity |
No more than 90%(at 20℃C), no condensation. |
|
Power supply |
Three-phase five-wire system 380Vx(+5%)50HZ2HZ; |
|
Three-phase voltage unbalance rate |
≤3% |
|
Altitude |
Not exceeding 1000m. When it exceeds this limit, the control components must be adjusted accordingly. |
|
On-site environment |
There should be no conductive or explosive dust at the equipment installation site, and no gases that corrode metals or damage insulation |
|
Body or steam and other media. |
|
Flow range |
0-300m ³ /h |
|
Pressure range |
0-2.5MPa |
|
Pressure regulation accuracy |
≤0.01MPa |
|
Ambient temperature |
0℃ to 40℃. If the temperature exceeds this range, corresponding measures must be taken. |
|
Relative humidity |
No more than 90%(at 20℃C), no condensation. |
|
Power supply |
Three-phase five-wire system 380Vx(+5%)50HZ2HZ; |
|
Three-phase voltage unbalance rate |
≤3% |
|
Altitude |
Not exceeding 1000m. When it exceeds this limit, the control components must be adjusted accordingly. |
|
On-site environment |
There should be no conductive or explosive dust at the equipment installation site, and no gases that corrode metals or damage insulation |